Turn off MathJax
Article Contents
Yanfei ZHANG, Yunhao LI, Lingfei KONG, Wenchao LI, Yanjing Yi. Rolling bearing condition monitoring method based on multi-feature information fusion[J]. Journal of Advanced Manufacturing Science and Technology . doi: 10.51393/j.jamst.2022020
Citation: Yanfei ZHANG, Yunhao LI, Lingfei KONG, Wenchao LI, Yanjing Yi. Rolling bearing condition monitoring method based on multi-feature information fusion[J]. Journal of Advanced Manufacturing Science and Technology . doi: 10.51393/j.jamst.2022020

Rolling bearing condition monitoring method based on multi-feature information fusion

doi: 10.51393/j.jamst.2022020

This study was supported by the Shaanxi Provincial Key R&D Program of China (2022GY-211)

  • Received Date: 2022-05-21
  • Rev Recd Date: 2022-07-24
  • Available Online: 2022-09-13
  • In machining operations, the misalignment of the bearing assembly or imbalanced load often leads to deflection and failure of the tool spindle. The use of single feature information does not accurately monitor the complex working conditions. Considering this, this paper proposes a rolling bearing running condition monitoring method which is based on multiple feature information. Firstly, a multi-dimensional feature matrix is obtained by extracting the features of a single type of raw data in the time domain, frequency domain, and time-frequency domain, and then the dimensionality of the matrix is reduced by principal component analysis (PCA). An entropy weight improved the D-S(EWID-S) evidence theory is proposed. By updating the initial evidence source, and applying the Euclidean distance of the spatial centroid, the fusion results were evaluated. Finally, a test rig for eccentric bearing load operation is developed to obtain the vibration signals at two distinct locations and to confirm the proposed method. The test results show that the condition monitoring method based on the PCA and EWID-S evidence theory can effectively identify the bearing operating at different degrees of deflection. At the same time, by comparing with other improved D-S evidence theory methods, it is verified that this method has more advantages in information fusion and bearing condition monitoring.
  • loading
  • [1]
    . Li Z, Yan X. Study on data fusion of multi-dimensional sensors for health monitoring of rolling bearings. Journal of Insight-Non-Destructive Testing and Condition Monitoring 2013; 55(3):147-151.
    . Gu R, Chen J, Hong R, et al. Incipient fault diagnosis of rolling bearings based on adaptive variational mode decomposition and Teager energy operator. Journal of Measurement 2020; 149:106941.
    . Yi J, Pang B, Liu H, et al. Influence of misalignment on nonlinear dynamic characteristics for matched bearings-rotor system. Proceedings of the Institution of Mechanical Engineers, Part K:Journal of Multi-body Dynamics 2014; 228(2):172-181.
    . Li JM, Wang H, Li M, et al. Fault diagnosis of rolling bearing based on improved adaptive no-parameter empirical wavelet transform. Journal of Metrology 2020; 41(6):710-716[Chinese].
    . Gu X, Yang S, Liu Y, et al. Rolling element bearing faults diagnosis based on Kurtogram and frequency domain correlated kurtosis. Journal of Measurement Science and Technology 2016; 27(12):125019[Chinese].
    . Dai SC, Guo Y, Wu X. Fault feature extraction of gearbox rolling bearing based on synchronous averaging and cepstral editing. Journal of Vibration and Shock 2015; 34(21):205-209[Chinese].
    . Sun W, An Yang G, Chen Q, et al. Fault diagnosis of rolling bearing based on wavelet transform and envelope spectrum correlation. Journal of Vibration and Control 2013; 19(6):924-941[Chinese].
    . Li S, Xin Y, Li X, et al. A review on the signal processing methods of rotating machinery fault diagnosis. 2019 IEEE 8th Joint International Information Technology and Artificial Intelligence Conference (ITAIC). 2019:1559-1565.
    . Li SM, Hou YZ, Li XL. A review of time and frequency domain analysis methods for rolling bearing vibration faults. J. Journal of Chongqing University of Technology (Natural Sciences) 2021; 35(10):85-93[Chinese].
    . Safizadeh MS, Latifi SK. Using multi-sensor data fusion for vibration fault diagnosis of rolling element bearings by accelerometer and load cell. Journal of Information Fusion 2014; 18:1-8.
    . Wang J, Wang D, Wang S, et al. Fault diagnosis of bearings based on multi-sensor information fusion and 2D convolutional neural network. Journal of IEEE Access 2021; 9:23717-23725.
    . Zhou X, Jiang P. Variation source identification for deep hole boring process of cutting-hard workpiece based on multi-source information fusion using evidence theory. Journal of Intelligent Manufacturing 2017; 28(2):255-270.
    . Basir O, Yuan X. Engine fault diagnosis based on multi-sensor information fusion using Dempster-Shafer evidence theory. Journal of Information Fusion 2007; 8:379-386.
    . Wang L, Lv WM, Teng KN. Real-time health state assessment of long-term storage equipment based on test data. Journal of Systems Engineering and Electronics Technology 2013, 35(6):1212-1217.
    . Li HL, Tao JY, Bai GH, et al. A practical method for fault diagnosis of wind turbine gearbox using multi-source information fusion. 2017 Prognostics and System Health Management Conference (PHM-Harbin). 2017:1-6[Chinese].
    . Hui ZH. Distributed multi-sensor target recognition based on weighted D-S evidence theory. Journal of Computer Applications 2007; (1):56-57,97[Chinese].
    . Huo Z, Zhang Y, Shu L, et al. Bearing fault diagnosis using multi-sensor fusion based on weighted D-S evidence theory. 2018 18th International Conference on Mechatronics-Mechatronika (ME). 2018:1-6.
    . Li S, Liu G, Tang X, et al. An ensemble deep convolutional neural network model with improved D-S evidence fusion for bearing fault diagnosis. Journal of Sensors 2017; 17(8):1729[Chinese].
    . Ban CL, Li SY, Zhang B. Research on rolling bearing fault diagnosis method based on sample entropy and SVM. Journal of China Testing 2020; 46(11):37-42[Chinese].
    . Yen GG, Lin KC. Wavelet packet feature extraction for vibration monitoring. Journal of IEEE Transactions on Industrial Electronics 2000; 47(3):650-667.
    . Rafiee J, Rafiee MA, Tse PW. Application of mother wavelet functions for automatic gear and bearing fault diagnosis. Journal of Expert Systems with Applications 2010; 37(6):4568-4579.
    . Ngui WK, Leong MS, Hee LM, et al. Wavelet analysis:Mother wavelet selection methods. Journal of Applied Mechanics and Materials 2013; 393:953-958.
    . Yadavar NS, Rezaie H, Kilpatrik M, et al. Intelligent fault diagnosis of bearings based on energy levels in frequency bands using wavelet and Support Vector Machines (SVM). Journal of Manufacturing and Materials Processing 2019; 3(1):11.
  • 加载中


    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索


    Article Metrics

    Article views (349) PDF downloads(4) Cited by()
    Proportional views


    DownLoad:  Full-Size Img  PowerPoint