Volume 4 Issue 1
Oct.  2023
Turn off MathJax
Article Contents
Zengkun WANG, Zhibo YANG, Xuefeng CHEN. Forward-backward spatial smoothing for snapshot matrix construction of blade tip timing signal[J]. Journal of Advanced Manufacturing Science and Technology , 2024, 4(1): 2023021. doi: 10.51393/j.jamst.2023021
Citation: Zengkun WANG, Zhibo YANG, Xuefeng CHEN. Forward-backward spatial smoothing for snapshot matrix construction of blade tip timing signal[J]. Journal of Advanced Manufacturing Science and Technology , 2024, 4(1): 2023021. doi: 10.51393/j.jamst.2023021

Forward-backward spatial smoothing for snapshot matrix construction of blade tip timing signal

doi: 10.51393/j.jamst.2023021
Funds:

This work was supported by the National Natural Science Foundation of China (Nos. 52241502, 52222504), the Natural Science Talents Foundation of Shaanxi Province (No. 2021JC-04).

  • Received Date: 2023-09-11
  • Accepted Date: 2023-11-21
  • Rev Recd Date: 2023-10-14
  • Available Online: 2023-11-28
  • Publish Date: 2023-11-28
  • Blade tip timing (BTT) is a non-contact measurement method for rotor blades. Its non-uniform sampling pattern is determined by the physical probe placement and rotational speed. Due to the lack of sampling probes and uneven placement, the anti-aliasing spectrum analysis for non-uniformly sampled signals becomes a hotspot in the BTT field. In this paper, a forward backward spatial smoothing (FBSS) method is used to estimate the autocorrelation matrix more accurately, which enables a better frequency identification ability for the autocorrelation matrix-based methods. Additionally, the relationship between the exponential complex steering vector and real-valued steering vectors is revealed. The peak significance is proposed to measure the quality of the pseudo spectrum. By taking multiple signal classification and minimum variance distortionless response as two example methods, the superiority of FBSS is demonstrated by simulations and experiments.

  • loading
  • [1]
    . Wang D, Cao HR. A comprehensive review on crack modeling and detection methods of aero-engine disks. Journal of Advanced Manufacturing Science and Technology 2022; 2(3): 2022012.
    [2]
    . Zhou Y, Hong LF, Li XY, et al. Investigation on transient dynamics of rotor system in air turbine starter based on magnetic reduction gear. Journal of Advanced Manufacturing Science and Technology 2021; 1 (3): 2021009.
    [3]
    . Kharyton V, Dimitriadis G, Defise C. A discussion on the advancement of blade tip timing data processing. Proceedings of the ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition; 2017.p.V07BT35A002.
    [4]
    . Joung KK, Kang SC, Paeng KS, et al. Analysis of vibration of the turbine blades using non-intrusive stress measurement system. ASME 2006 Power Conference; 2006.p.391-397.
    [5]
    . Liu Z, Duan F, Niu G, et al. An improved Circumferential Fourier Fit (CFF) method for blade tip timing measurements. Applied Sciences 2020; 10 (11): 3675.
    [6]
    . Collins GW. Fundamental numerical methods and data analysis. 2003.
    [7]
    . Kharyton V, Bladh R. Using tiptiming and strain gauge data for the estimation of consumed life in a compressor blisk subjected to stall-induced loading. Proceedings of the ASME Turbo Expo 2014: Turbomachinery Technical Conference and Exposition; 2014.p.V07BT33A028.
    [8]
    . Wang P, Karg D, Fan Z, et al. Non-contact identification of rotating blade vibration. Mechanical Engineering Journal 2015; 2(3): 15-00025.
    [9]
    . Wang Z, Yang Z, Wu S, et al. An improved multiple signal classification for nonuniform sampling in blade tip timing. IEEE Transactions on Instrumentation and Measurement 2020; 69(10): 7941-7952.
    [10]
    . Stephan C, Berthillier M, Lardies J, et al. Tip-timing data analysis for mistuned bladed discs assemblies. Turbo Expo: Power for Land, Sea, and Air 2008. 2008.p.447-455.
    [11]
    . Greitans M. Multiband signal processing by using nonuniform sampling and iterative updating of autocorrelation matrix. Proceedings of the 2001 International Conference on Sampling Theory and Application. 2001.
    [12]
    . Landau H. Necessary density conditions for sampling and interpolation of certain entire functions. 1967.
    [13]
    . Ghazaei M, Johansson R. Recovery of uniform samples and spectrum of band-limited irregularly sampled signals. 2016.
    [14]
    . Hu Z, Lin J, Chen ZS, et al. A non-uniformly under-sampled blade tip-timing signal reconstruction method for blade vibration monitoring. Sensors 2015; 15 (2): 2419-2437.
    [15]
    . Chen S, Yang Y, Hu H, et al. Interpolation method for wideband signal reconstruction based on blade tip timing measurement. Measurement 2021; 176: 109168.
    [16]
    . Pan M, Yang Y, Guan F, et al. Sparse representation based frequency detection and uncertainty reduction in blade tip timing measurement for multi-mode blade vibration monitoring. Sensors 2017; 17 (8): 1745.
    [17]
    . Bouchain A, Picheral J, Lahalle E, et al. Blade vibration study by spectral analysis of tip-timing signals with OMP algorithm. Mechanical Systems and Signal Processing 2019; 130: 108-121.
    [18]
    . Wang ZK, Yang ZB, Wu SM, et al. Block-MUSIC in blade tip timing: Performance study of block snapshot matrix. Mechanical Systems and Signal Processing 2023; 198: 110374.
    [19]
    . Iwai T, Hirose N, Kikuma N, et al. DOA estimation by MUSIC algorithm using forward-backward spatial smoothing with overlapped and augmented arrays. 2014 International Symposium on Antennas and Propagation Conference Proceedings; 2014.p.375-376.
    [20]
    . Wang Y, Si W, Wang K. A real-valued MUSIC algorithm with forward/backward technique. 2017 International Applied Computational Electromagnetics Society Symposium-Italy (ACES). 2017.p.1-2.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(1)

    Article Metrics

    Article views (306) PDF downloads(17) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return