Volume 4 Issue 1
Oct.  2023
Turn off MathJax
Article Contents
Zonglin LIU, Qiang GUO, Yuwen SUN, Wenbo WANG, Weisen ZHAO, Zi YANG. Surface roughness and burr generation in micro-milling: A review[J]. Journal of Advanced Manufacturing Science and Technology , 2024, 4(1): 2023017. doi: 10.51393/j.jamst.2023017
Citation: Zonglin LIU, Qiang GUO, Yuwen SUN, Wenbo WANG, Weisen ZHAO, Zi YANG. Surface roughness and burr generation in micro-milling: A review[J]. Journal of Advanced Manufacturing Science and Technology , 2024, 4(1): 2023017. doi: 10.51393/j.jamst.2023017

Surface roughness and burr generation in micro-milling: A review

doi: 10.51393/j.jamst.2023017
  • Received Date: 2023-09-09
  • Accepted Date: 2023-11-02
  • Rev Recd Date: 2023-10-12
  • Available Online: 2023-11-06
  • Publish Date: 2023-11-06
  • Micro-milling as a precision manufacturing process has received increasing attention for its unique advantages in machining tiny parts. The surface quality of parts is an important factor that affects the performance and life of micro parts. Therefore, the study of the surface quality of parts after micro-milling has become an important topic of great interest. In this paper, the surface roughness generation models are reviewed to provide a comprehensive understanding of the various factors affecting surface quality. Based on these models, the key factors affecting surface roughness and burr generation are summarized. Furthermore, the challenges and opportunities for achieving high surface quality parts during micro-milling are summarized and some suggestions for future research are expected.

  • loading
  • [1]
    . Wang W, Guo Q, Yang Z, et al. A state-of-the-art review on robotic milling of complex parts with high efficiency and precision. Robotics and Computer-Integrated Manufacturing 2023; 79: 102436.
    [2]
    . Sun Y, Shi Z, Guo Q, et al. A novel method to predict surface topography in robotic milling of directional plexiglas considering cutter dynamical displacement. Journal of Materials Processing Technology 2022; 304: 117545.
    [3]
    . Guo Q, Zheng Z, Jiang Y, et al. Mechanism and force modeling for cross-edges in the flank-end milling process based on the constrained cutting theory. Journal of Manufacturing Processes 2023; 101: 867-881.
    [4]
    . Guo Q, Wang W, Jiang Y, et al. 3d surface topography prediction in the five-axis milling of plexiglas and metal using cutters with non-uniform helix and pitch angles combining runout. Journal of Materials Processing Technology 2023; 314: 117885.
    [5]
    . Wang X, Lu X, Jia Z, et al. The application of micro-milling technology in the processing of micro-strip antenna. International journal of material and product technology 2015; 51(1): 44-59.
    [6]
    . Sweatt WC, Gill DD, Adams DP, et al. Diamond milling of micro-optics. 2006 IEEE Aerospace Conference,2006.
    [7]
    . Lin YS, Yang CH, Wang CY, et al. An aluminum microfluidic chip fabrication using a convenient micromilling process for fluorescent poly(dl-lactide-coglycolide) microparticle generation. Sensors (Basel) 2012; 12(2): 1455-1467.
    [8]
    . Filiz S, Xie L, Weiss LE, et al. Micromilling of microbarbs for medical implants. International journal of machine tools & manufacture 2008; 48(3): 459-472.
    [9]
    . Cai Y, Liu Z, Song Q, et al. Fluid mechanics of internal flow with friction and cutting strategies for micronozzles. International Journal of Mechanical Sciences 2015; 100: 41-49.
    [10]
    . Heaney PJ, Sumant AV, Torres CD, et al. Diamond coatings for micro end mills: enabling the dry machining of aluminum at the micro-scale. Diamond and Related Materials 2008; 17(3): 223-233.
    [11]
    . Chen N, Chen M, Wu C, et al. The design and optimization of micro polycrystalline diamond ball end mill for repairing micro-defects on the surface of KDP crystal. Precision Engineering 2016; 43: 345-355.
    [12]
    . Kirchberg S, Chen L, Xie L, et al. Replication of precise polymeric microlens arrays combining ultra-precision diamond ball-end milling and micro injection molding. Microsystem Technologies 2012; 18(4): 459-465.
    [13]
    . Wang Y, Zou B, Huang C, et al. The micro-cutting performance of cermet and coated WC micro-mills in machining of TC4 alloy micro-grooves. The International Journal of Advanced Manufacturing Technology 2018; 96(1-4): 1403-1414.
    [14]
    . Li X, Guo C, Liu H, et al. An accuracy control strategy for micro-milling process of folded waveguide slow wave structure. Journal of Advanced Manufacturing Science and Technology 2023; 3(1): 2022021.
    [15]
    . Chen W, Zheng L, Xie W, et al. Modelling and experimental investigation on textured surface generation in vibration-assisted micro-milling. Journal of Materials Processing Technology 2019; 266: 339-350.
    [16]
    . Li H, Lai X, Li C, et al. Modelling and experimental analysis of the effects of tool wear, minimum chip thickness and micro tool geometry on the surface roughness in microend-milling. Journal of Micromechanics and Microengineering 2008; 18(2): 25006.
    [17]
    . Kouravand S, Imani BM, Ni J. Topography and surface roughness of floor in groove micro milling. Journal of Mechanics 2014; 30(6): 667-678.
    [18]
    . Yuan Y, Jing X, Ehmann KF, et al. Surface roughness modeling in micro end-milling. The International Journal of Advanced Manufacturing Technology 2018; 95(5-8): 1655-1664.
    [19]
    . Lu X, Zhang H, Jia Z, et al. Floor surface roughness model considering tool vibration in the process of micro-milling. The International Journal of Advanced Manufacturing 20. Lu X, Hou P, Luan Y, et al. Study on surface roughness of sidewall when micro-milling lf21 waveguide slits. Applied Sciences 2022; 12(11): 5415.
    [20]
    . Lu X, Hou P, Luan Y, et al. Study on surface roughness of sidewall when micro-milling lf21 waveguide slits. Applied Sciences 2022; 12(11): 5415
    [21]
    . Beruvides G, Castaño F, Quiza R, et al. Surface roughness modeling and optimization of tungsten–copper alloys in micro-milling processes. Measurement 2016; 86: 246-252.
    [22]
    . Lu X, Xue L, Ruan F, et al. Prediction model of the surface roughness of micro-milling single crystal copper. Journal of Mechanical Science and Technology 2019; 33(11): 5369- 5374.
    [23]
    . Lu X, Hu X, Wang H, et al. Research on the prediction model of micro-milling surface roughness of inconel718 based on SVM. Industrial Lubrication and Tribology 2016; 68(2): 206-211.
    [24]
    . Yi J, Jiao L, Wang X, et al. Surface roughness models and their experimental validation in micro milling of 6061-T6 Al alloy by response surface methodology. Mathematical Problems in Engineering 2015; 2015: 1-9.
    [25]
    . Lu X, Hu X, Jia Z, et al. Model for the prediction of 3d surface topography and surface roughness in micro-milling Inconel 718. The International Journal of Advanced Manufacturing Technology 2018; 94(5-8): 2043-2056.
    [26]
    . Zhang X, Pan X, Wang G. Influence factors of surface topography in micro-side milling. The International Journal of Advanced Manufacturing Technology 2019; 105(12): 5239-5245.
    [27]
    . Li G, Qu D, Feng WW, et al. Modeling and experimental study on the force of micro-milling titanium alloy based on tool runout. The International Journal of Advanced Manufacturing Technology 2016; 87(1-4): 1193-1202.
    [28]
    . Du Y, Song Q, Liu Z. Prediction of micro milling force and surface roughness considering size-dependent vibration of micro-end mill. The International Journal of Advanced Manufacturing Technology 2022; 119(9-10): 5807-5820.
    [29]
    . Lu X, Wang F, Wang X, et al. Modelling and optimisation of cutting parameters on surface roughness in micro-milling Inconel 718 using response surface methodology and genetic algorithm. International Journal of Nanomanufacturing 2018; 14(1): 34.
    [30]
    . Lu X, Wang F, Jia Z, et al. The flank wear prediction in micro-milling Inconel 718. Industrial Lubrication and Tribology 2018; 70(8): 1374-1380.
    [31]
    . Wen D, Wan M. Efficient prediction of machining errors caused by tool deflection in down milling. Journal of Advanced Manufacturing Science and Technology 2023; 3(2): 2023004.
    [32]
    . Li S, Zou B, Xu K, et al. Machined channel quality and tool life using cermet micro-mill in micro-milling aluminum alloy. International Journal of Advanced Manufacturing Technology 2019; 101(9-12): 2205-2216.
    [33]
    . Wang Y, Zou B, Huang C, et al. Feasibility study of the Ti(C7N3)-based cermet micro-mill based on dynamic fatigue behavior and modeling of the contact stress distribution on the round cutting edge. International Journal of Mechanical Sciences 2019; 155: 143-158.
    [34]
    . Wang J, Zhang Z, Zhang C, et al. Simulation and experiment study of burrs in micro-milling Zr-based metallic glass. Journal of Mechanical Science and Technology 2020; 34(7): 3027-3039.
    [35]
    . Ding P, Huang X, Zhang X, et al. Reliability analysis of micro milling accuracy based on flexible force model. The International Journal of Advanced Manufacturing Technology 2022; 119(11-12): 8193-8209.
    [36]
    . Gao P, Liang Z, Wang X, et al. Effects of different chamfered cutting edges of micro end mill on cutting performance. The International Journal of Advanced Manufacturing Technology 2018; 96(1-4): 1215-1224.
    [37]
    . Liang Z, Li S, Zhou T, et al. Fabrication and milling performance of micro ball-end mills with different relief angles. The International Journal of Advanced Manufacturing Technology 2018; 98(1-4): 919-928.
    [38]
    . Oliaei SNB, Karpat Y. Polycrystalline diamond end mill cutting edge design to improve ductile-mode machining of silicon. Precision Engineering 2018; 51: 403-414.
    [39]
    . Huo D, Lin C, Dalgarno K. An experimental investigation on micro machining of fine-grained graphite. The International Journal of Advanced Manufacturing Technology 2014; 72(5-8): 943-953.
    [40]
    . Özel T, Thepsonthi T, Ulutan D, et al. Experiments and finite element simulations on micro-milling of Ti–6Al–4V alloy with uncoated and CBN coated micro-tools. CIRP Annals 2011; 60(1): 85-88.
    [41]
    . Wang Y, Zou B, Huang C. Tool wear mechanisms and micro-channels quality in micro-machining of Ti-6Al-4V alloy using the Ti(c7n3)-based cermet micro-mills. Tribology International 2019; 134: 60-76.
    [42]
    . Wang Y, Zou B, Wang J, et al. Effect of the progressive tool wear on surface topography and chip formation in micro-milling of Ti–6Al–4V using Ti(c7n3)-based cermet micro-mill. Tribology International 2020; 141: 105900.
    [43]
    . Mu D, Liu X, Yue C, et al. On-line tool wear monitoring based on machine learning. Journal of Advanced Manufacturing Science and Technology 2021; 1(2): 2021002.
    [44]
    . Sun W, Zhang D, Luo M. Machining process monitoring Manufacturing Science and Technology 2021; 1(2): 2021001.
    [45]
    . Manso CS, Thom S, Uhlmann E, et al. Tool wear modelling using micro tool diameter reduction for micro-end-milling of tool steel H13. The International Journal of Advanced Manufacturing Technology 2019; 105(5-6): 2531-2542.
    [46]
    . Gilbin A, Fontaine M, Michel G, et al. Capability of tungsten carbide micro-mills to machine hardened tool steel. International Journal of Precision Engineering and Manufacturing 2013; 14(1): 23-28.
    [47]
    . Lu X, Wang F, Xue L, et al. Investigation of material removal rate and surface roughness using multi-objective optimization for micro-milling of Inconel 718. Industrial Lubrication and Tribology 2019; 71(6): 787-794.
    [48]
    . Gao Q, Li W, Chen X. Surface quality and tool wear in micro-milling of single-crystal aluminum. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 2019; 233(16): 5597- 5609.
    [49]
    . Uhlmann E, Piltz S, Schauer K. Micro milling of sintered tungsten-copper composite materials. Journal of materials processing technology 2005; 167(2): 402-407.
    [50]
    . Wang W, Kweon S H, Yang S H. A study on roughness of the micro-end-milled surface produced by a miniatured machine tool. Journal of Materials Processing Technology 2005; 162-163: 702-708.
    [51]
    . Ghani J A, Choudhury IA, Hassan HH. Application of Taguchi method in the optimization of end milling parameters. Journal of Materials Processing Technology 2004; 145(1): 84-92.
    [52]
    . Khanghah SP, Boozarpoor M, Lotfi M, et al. Optimization of micro-milling parameters regarding burr size minimization via RSM and simulated annealing algorithm. Transactions of the Indian Institute of Metals 2015; 68(5): 897-910.
    [53]
    . Aramcharoen A, Mativenga P T. Size effect and tool geometry in micromilling of tool steel. Precision Engineering 2009; 33(4): 402-407.
    [54]
    . Bissacco G, Hansen H N, De Chiffre L. Micromilling of hardened tool steel for mould making applications. Journal of Materials Processing Technology 2005; 167(2-3): 201- 207.
    [55]
    . Chen Y, Wang T, Zhang G. Research on parameter optimization of micro-milling Al7075 based on edge-sizeeffect. Micromachines 2020; 11(2): 197.
    [56]
    . Dang X, Wan M, Yang Y. Prediction and suppression of chatter in milling of structures with low-rigidity: a review. Journal of Advanced Manufacturing Science and Technology 2021; 1(3): 2021010.
    [57]
    . Cao Z, Li H. Investigation of machining stability in micro milling considering the parameter uncertainty. Advances in Mechanical Engineering 2015; 7(3): 2071726686.
    [58]
    . Liu M, Halfmann EB, Suh CS. Multi-dimensional timefrequency control of micro-milling instability. Journal of Vibration and Control 2014; 20(5): 643-660.
    [59]
    . Graham E, Mehrpouya M, Nagamune R, et al. Robust prediction of chatter stability in micro milling comparing edge theorem and LMI. CIRP Journal of Manufacturing Science and Technology 2014; 7(1): 29-39.
    [60]
    . Yue C, Xie Z, Liu X, et al. Chatter prediction of milling process for titanium alloy thin-walled workpiece based on EMD-SVM. Journal of Advanced Manufacturing Science and Technology 2022; 2(2): 2022010.
    [61]
    . Thepsonthi T, Özel T. An integrated toolpath and process parameter optimization for high-performance micromilling process of Ti–6Al–4V titanium alloy. The International Journal of Advanced Manufacturing Technology 2014; 75(1-4): 57-75.
    [62]
    . Jiao F, Cheng K. An experimental investigation on micromilling of polymethyl methacrylate components with nanometric surface roughness. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2014; 228(5): 790-796.
    [63]
    . Koklu U, Basmaci G. Evaluation of tool path strategy and cooling condition effects on the cutting force and surface quality in micromilling operations. Metals 2017; 7(10): 426.
    [64]
    . Annoni M, Rebaioli L, Semeraro Q. Thin wall geometrical quality improvement in micromilling. The International Journal of Advanced Manufacturing Technology 2015; 79(5-8): 881-895.
    [65]
    . Vázquez E, Rodríguez CA, Elías-Zúñiga A, et al. An experimental analysis of process parameters to manufacture metallic micro-channels by micro-milling. The International Journal of Advanced Manufacturing Technology 2010; 51(9-12): 945-955.
    [66]
    . Pham M, Yoon H, Khare V, et al. Evaluation of ionic liquids as lubricants in micro milling – process capability and sustainability. Journal of Cleaner Production 2014; 76: 167-173.
    [67]
    . Debnath S, Reddy MM, Yi QS. Environmental friendly cutting fluids and cooling techniques in machining: a review. Journal of Cleaner Production 2014; 83: 33-47.
    [68]
    . Mamedov A, Lazoglu I. Thermal analysis of micro milling titanium alloy ti-6al-4v. Journal of Materials Processing Technology 2016; 229: 659-667. Ti6Al4V in high speed micro-milling by mathematical modeling. Manufacturing Letters 2017; 11: 12-16.
    [69]
    . Kumar P, Bajpai V, Singh R. Burr height prediction of and application: A review. Journal of Advanced Technology 2018; 94(9-12): 4415-4425.
    [70]
    . Kuram E, Ozcelik B. Effects of tool paths and machining parameters on the performance in micro-milling of Ti6Al4V titanium with high-speed spindle attachment. International journal of advanced manufacturing technology 2016; 84(1-4): 691-703.
    [71]
    . Komatsu T, Yoshino T, Matsumura T, et al. Effect of crystal grain size in stainless steel on cutting process in micromilling. Procedia CIRP 2012; 1: 150-155.
    [72]
    . Mian AJ, Driver N, Mativenga PT. Identification of factors that dominate size effect in micro-machining. International Journal of Machine Tools and Manufacture 2011; 51(5): 383-394.
    [73]
    . Wu X, Li L, He N, et al. Influence of the cutting edge radius and the material grain size on the cutting force in micro cutting. Precision Engineering 2016; 45: 359-364.
    [74]
    . Ahmadi M, Karpat Y, Acar O, et al. Microstructure effects on process outputs in micro scale milling of heat treated ti6al4v titanium alloys. Journal of Materials Processing Technology 2018; 252: 333-347.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(1)

    Article Metrics

    Article views (574) PDF downloads(118) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return