Volume 4 Issue 1
Oct.  2023
Turn off MathJax
Article Contents
Yao LIU, Jiahao LI, Zhigang ZHAO, Jinzhu GUO, Guohong LI, Xijing ZHU. Advanced grinding technologies for silicon carbide ceramic: A review[J]. Journal of Advanced Manufacturing Science and Technology , 2024, 4(1): 2023016. doi: 10.51393/j.jamst.2023016
Citation: Yao LIU, Jiahao LI, Zhigang ZHAO, Jinzhu GUO, Guohong LI, Xijing ZHU. Advanced grinding technologies for silicon carbide ceramic: A review[J]. Journal of Advanced Manufacturing Science and Technology , 2024, 4(1): 2023016. doi: 10.51393/j.jamst.2023016

Advanced grinding technologies for silicon carbide ceramic: A review

doi: 10.51393/j.jamst.2023016
Funds:

This study was supported by the Opening Foundation of Shanxi Provincial Key Laboratory for Advanced Manufacturing Technology (No. XJZZ202312), National Key R&D Program of China (Grant No. 2022YFC3005002).

  • Received Date: 2023-09-13
  • Accepted Date: 2023-10-07
  • Rev Recd Date: 2023-09-13
  • Available Online: 2023-10-24
  • Publish Date: 2023-10-23
  • Silicon carbide (SiC) ceramics have been widely used in industry due to their superior properties and excellent performance. Grinding is the key method to manufacture SiC to the desired shape, dimension, and surface quality. Grinding defects such as pits and cracks are easy to cause SiC strength degradation. In this paper, the advanced grinding technologies for SiC ceramics, including high-speed grinding, ultrasonic vibration-assisted grinding, laser-assisted grinding, and electrolytic in-process dressing grinding, are reviewed. The characteristics and machine tool setups of each advanced grinding technology are analyzed and compared with traditional grinding technology to reveal the advantages. The latest research on surface integrity, material removal mechanism, simulation, and other related studies are reviewed to express the fundamental theory in each advanced grinding technology. Finally, the key innovation and future research areas for all advanced grinding technologies are drawn in the conclusion.

  • loading
  • [1]
    . Willander M, Friesel M, Wahab Q, et al. Silicon carbide and diamond for high temperature device applications. Journal of Materials Science: Materials in Electronics 2006;17(1):1-25.
    [2]
    . Fu Y, Su H, Ding W. High-efficiency machining technology for difficult-to-machine materials. 2rd ed. Northwestern Polytechnical University Press Co.Ltd; 2016.
    [3]
    . Ekkard B, Werner P, Oltmann R, et al. Cutting forces, tool wear and surface finish in high speed diamond machining. Precision Engineering 2017;49:293-304.
    [4]
    . Wang D, Ge P, Bi W, et al. Grain trajectory and grain workpiece contact analyses for modeling of grinding force and energy partition. The International Journal of Advanced Manufacturing Technology 2014;70(9): 2111-2123.
    [5]
    . Wu C, Li B, Yang J, et al. Prediction of grinding force for brittle materials considering co-existing of ductility and brittleness. The International Journal of Advanced Manufacturing Technology 2016;87(5):1967-1975.
    [6]
    . Wu C, Li P. Study on micro-damage mechanism of silicon carbide grinding and its high performance grinding technology. Journal of Mechanical Engineering 2019;55(6):232-232 [Chinese].
    [7]
    . Agarwal S, Venkateswara PR. A new surface roughness prediction model for ceramic grinding. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture 2005;219(11):811-819.
    [8]
    . Li S, Wang Z, Wu Y. Relationship between subsurface damage and surface roughness of ground optical materials. Journal of Central South University of Technology 2007;14(4):546-551.
    [9]
    . Wu C, Li B, Liu Y, et al. Surface roughness modeling for grinding of Silicon Carbide ceramics considering co-existence of brittleness and ductility. International Journal of Mechanical Sciences 2017;133:167-177.
    [10]
    . Zhang B, Hows TD. Subsurface evaluation of ground ceramics. CIRP Annal Manufacturing Technology 1995;44(1):263-266.
    [11]
    . Liu Y, Li B, Wu C, et al. Simulation-based evaluation of surface micro-cracks and fracture toughness in high-speed grinding of silicon carbide ceramics. The International Journal of Advanced Manufacturing Technology 2016;86(1):799-808.
    [12]
    . Wu C, Pang J, Li B, et al. High-speed grinding of HIP-SiC ceramics on transformation of microscopic features. The International Journal of Advanced Manufacturing Technology 2019;102(5):1913-1921.
    [13]
    . Zhang Q, To S, Zhao Q, et al. Surface generation mechanism of WC/Co and RB-SiC/Si composites under high spindle speed grinding (HSSG). International Journal of Refractory Metals and Hard Materials 2016;56:123-131.
    [14]
    . Bifano TG, Dow TA, Scattergood RO. DuctileRegime Grinding: A New Technology for Machining Brittle Materials. Journal of Engineering for Industry 1991;113(2):184-189.
    [15]
    . Zhang B, Yin J. The “skin effect” of subsurface damage distribution in materials subjected to high-speed machining. International Journal of Extreme Manufacturing 2019;1(1):126-137.
    [16]
    . Huang H, Ling Y, Zhou L. High speed grinding of silicon nitride with resin bond diamond wheels. Journal of Materials Processing Technology 2003;141(3):329-336.
    [17]
    . Ramesh k, Yeo S, Gowri S. Experimental evalution of super high-speed grinding of advanced ceramics. International Journal of Advanced Manufacturing Technology & Machine Tool; 2001;17:87-92.
    [18]
    . Ling Y, Huang H, Ramesh K, et al. High speed versus conventional grinding in high removal rate machining of alumina and alumina–titania. International Journal of Machine Tools and Manufacture 2005;45(7):897-907.
    [19]
    . Chen S, Cheung C, Zhao C, et al. Simulated and measured surface roughness in high-speed grinding of silicon carbide wafers. The International Journal of Advanced Manufacturing Technology 2017;91(1):719-730.
    [20]
    . Cao J, Wu Y, Lu D, et al. Material removal behavior in ultrasonic-assisted scratching of SiC ceramics with a single diamond tool. International Journal of Machine Tools and Manufacture 2014;79:49-61.
    [21]
    . Chen C, Wang L, Fu S, et al. Dimensional accuracy compensation method of large shaft grinding via residual error iteration with fuzzy approach. Journal of Advanced Manufacturing Science and Technology 2023;3(3):1-9.
    [22]
    . Axen N, Kahlman L, Hutchings IM. Correlations between tangential force and damage mechanisms in the scratch testing of ceramics. Tribology International 1997;30(7):467-474.
    [23]
    . Dai J, Su H, Fu Y, et al. Study on the mechanism of grinding speed affecting grinding damage of silicon carbide ceramics. Journal of Mechanical Engineering 2022;58(21):316-320.
    [24]
    . Liu W, Deng C, Wan L. Simulation and experimental study on cutting silicon nitride ceramics with a single diamond abrasive particle. Chinese Journal of Mechanical Engineering 2015;51(21):191-198.
    [25]
    . Holmquist TJ, Johnson GR. Characterization and evaluation of silicon carbide for high-velocity impact. Journal of Applied Physics 2005;97(9):1-12.
    [26]
    . Ni J. The coupling of the thermal and mechanical influenceon the surface integrity by the high speed outer cylindrical grinding [dissertation]. Shanghai: Donghua University; 2014.
    [27]
    . Long H, Guo L, Wang C. Study on improving the accuracy of finite element simulation of ceramic high-speed grinding temperature. Manufacturing Technology & Machine Tool 2022;12:153-158.
    [28]
    . Wu Y, Wang H, Li S. Study on grinding temperature characteristics and surface quality of silicon nitride ceramics. Silicate bulletin 2019;38(09):3025-3031.
    [29]
    . Wu Y, Wang H, Li S. Thermal characteristics and surface forming mechanism of silicon nitride ceramics grinding. Surface Technology 2019;48(12):360-368 [Chinese].
    [30]
    . Zhang K, Zhao G, Sun J, et al. Simulation analysis and experimental study on surface grinding temperature of ZrO2 ceramics. Surface technology 2017;46(12):251-258 [Chinese].
    [31]
    . Li Z, Liu Y, Ding W. Comparing performance of CBN grinding wheels in high-speed grinding particulate reinforced titanium matrix composites. Diamond & abrasives engineering 2020;40(5):5-10.
    [32]
    . Cui Z, Feng C, Zhuang Z, et al. Precision grinding technology of diamond abrasive tools based on grinding method. Diamond & Abrasives Engineering 2021;1(34):5-11.
    [33]
    . Ni J, Li B, Pang J. A Practical study on the surface integrity of high-speed cylindrical grinding of SiC. Materials Science Forum 2012;723:202-207.
    [34]
    . Hong J, Hon MH, Davis RF. Self-diffusion in alpha and beta silicon carbide. Ceramurgia International 1979;5(4):155-160.
    [35]
    . Spur G, Holl SE. Ultrasonic assisted grinding of ceramics. Journal of Materials Processing Technology 1996;62(4):287-293.
    [36]
    . Chen Y, Su H, Qian N, et al. Ultrasonic vibrationassisted grinding of silicon carbide ceramics based on actual amplitude measurement: Grinding force and surface quality. Ceramics International 2021; 47(11):15433-15441.
    [37]
    . Li C, Zhang F, Meng B, et al. Material removal mechanism and grinding force modelling of ultrasonic vibration assisted grinding for SiC ceramics. Ceramics International 2017;43(3):2981-2993.
    [38]
    . Xu L, Li H, Cai X, et al. Study on surface quality in ultrasonic vibration grinding of SiCceramics with small diameter grinding wheel. Diamond & Abrasives Engineering 2020;2(40):68-77.
    [39]
    . Zhang G, Wang Z, Zeng Y. Experimental study of ultrasonic-assisted indentation and scratching of engineering ceramics at compressive prestressing. Surface Technology 2019;48(6):346-352 [Chinese].
    [40]
    . Shen J, Wang JQ, Jiang B, et al. Study on wear of diamond wheel in ultrasonic vibration-assisted grinding ceramic. Wear 2015;332-333:788-793.
    [41]
    . Li Z, Zhang F, Luo X, et al. Material removal mechanism of laser-assisted grinding of RB-SiC ceramics and process optimization. Journal of the European Ceramic Society 2019;39(4):705-717.
    [42]
    . Uhlmann E, Sammler C. Influence of coolant conditions in ultrasonic assisted grinding of high performance ceramics. Production Engineering 2010; 4(6):581-587.
    [43]
    . Kang R, Ma F, Dong Z. Ultrasonic assisted machining of difficult-to-cut material. Aviation Manufacturing Technology 2012;16:44-49.
    [44]
    . Zheng F, Dong Z, Zhang J, et al. Influence of ultrasonic vibration on material removal of scratching on RB-SiC with single diamond tool. Journal of Mechanical Engineering 2019;55(1):225-232.
    [45]
    . Cao J, Zhang Q. Material removal behavior in ultrasonic assisted grinding of SiC ceramics. Journal of Mechanical Engineering 2019;55(13):205-211.
    [46]
    . Warnecke G, Rosenberger U, Milberg J. Basics of process parameter selection in grinding of advanced ceramics. J CIRP Annals 1995;44(1):283-286.
    [47]
    . Gao G, Kong Q, Zhao B, et al. Research on plastic removal mechanism of engineering ceramics grinding with ultrasonic assistance. 2006 International Technology and Innovation Conference; 2006 November 6-7; Hangzhou; 2006.
    [48]
    . Molaie MM, Akbari J, Movahhedy MR. Ultrasonic assisted grinding process with minimum quantity lubrication using oil-based nanofluids. Journal of Cleaner Production 2016;129:212-222.
    [49]
    . Xu M, Ding K, Li Q. Influence of different tools on ultrasonic assisted grinding performance of silicon carbide ceramics. Tool Engineering 2022;56(10):40-47.
    [50]
    . Duan N, Yu Y, Wang W, et al. SPH and FE coupled 3D simulation of monocrystal SiC scratching by single diamond grit. International Journal of Refractory Metals and Hard Materials 2017;64:279-293.
    [51]
    . Wang Y, Lin B, Wang S, et al. Study on the system matching of ultrasonic vibration assisted grinding for hard and brittle materials processing. International Journal of Machine Tools and Manufacture 2014;77:66-73.
    [52]
    . Cao J, Liu Y, Meng N. Simulation investigation into mechanics behaviour in material removal process of ultrasonic assisted grinding of silicon carbide ceramics. Abrasive Technology 2018;8(4):311-326.
    [53]
    . Xiao G, Zhang Y, Huang Y, et al. Grinding material removal of titanium alloy: Research status and prospect. Journal of Advanced Manufacturing Science and Technology 2021;1:21-30.
    [54]
    . Hockin H, Xu X, Jahanmir S. Scratching and grinding of a machinable glass-ceramic with weak interfaces and rising T-curve. Journal of the American Ceramic Society 1995;78(2):497-500.
    [55]
    . Li S, Wu Y, Nomura M. Effect of grinding wheel ultrasonic vibration on chip formation in surface grinding of Inconel 718. The International Journal of Advanced Manufacturing Technology 2016;86(1):1113-1125.
    [56]
    . Ding K, Fu Y, Su H, et al. Wear of diamond grinding wheel in ultrasonic vibration-assisted grinding of silicon carbide. The International Journal of Advanced Manufacturing Technology 2014;71(9):1929-1938.
    [57]
    . Wang Y, Lin B, Cao X, et al. An experimental investigation of system matching in ultrasonic vibration assisted grinding for titanium. Journal of Materials Processing Technology 2014;214(9):1871-1878.
    [58]
    . Akbari J, Borzoie H, Mamduhi MH. Study on ultrasonic vibration effects on grinding process of alumina ceramic (Al2O3). World Academy of Science, Engineering and Technology, International Journal of Mechanical 2008;2:722-726.
    [59]
    . Zhang X, Chen G, An W, et al. Experimental investigations of machining characteristics of laser-induced thermal cracking in alumina ceramic wet grinding. Mechatronic and Manufacturing Engineering 2014;72(9):1325-1331.
    [60]
    . Zhang L, Wang S, Wang N. Study on cutting force in high speed milling of laser cladding Ti-6Al-4V. J Mechanical Science and Technology for Aerospace Engineering 2021;40(4):562-565.
    [61]
    . Xu S, Yao Z, Cai H, et al. An experimental investigation of grinding force and energy in laser thermal shock-assisted grinding of zirconia ceramics. The International Journal of Advanced Manufacturing Technology 2017;91(9):3299-3306.
    [62]
    . Lee S, Kim J, Jeong S. Microstructural variations and machining characteristics of silicon nitride ceramics from increasing the temperature in laser assisted machining. International Journal of Precision Engineering and Manufacturing 2014;15(7):1269-1274.
    [63]
    . Westkämper E. Grinding assisted by Nd:YAG lasers. J. CIRP Annals 1995;44(1):317-320.
    [64]
    . Wu C, Zhang T, Guo W, et al. Laser-assisted grinding of silicon nitride ceramics: Microgroove preparation and removal mechanism. Ceramics International 2022;48(21):32366-32379.
    [65]
    . Chang W, Luo X, Zhao Q. Laser assisted micro grinding of high strength materials. J Key Eng Mater 2012;496:44-49.
    [66]
    . Anderson M, Patwa R, Shin YC. Laser assisted machining of Inconel 718 with an economic analysis. International Journal of Machine Tools Manufacture 2006;46(14):1879-1891.
    [67]
    . Ma Z, Yu K, Dong J. Laser-assisted grinding mechanism of Al2O3 ceramics. Journal of Northeastern University 2020;41(4):541-546.
    [68]
    . Liu W, Gu H, Tang D. Laser modified grinding of silicon carbide ceramics. Mechanical Science and Technology for Aerospace Engineering 2022;1-6 [Chinese].
    [69]
    . Dandekar CR, Shin YC. Multi-scale modeling to predict sub-surface damage ap-plied to laserassisted machining of a particulate reinforced metal matrix composite. Mater Process Technol 2013;213:153-160.
    [70]
    . Ma Z, Wang Q, Dong J, et al. Experimental investigation and numerical analysis for machinability of alumina ceramic by laser-assisted grinding. Precision Engineering 2021;72:798-806.
    [71]
    . Singh R, Alberts MJ, Melkote SN. Characterization and prediction of the heataffected zone in a laser-assisted mechanical micromachining process. International Journal of Machine Tools and Manufacture 2008;48:994-1004.
    [72]
    . Pfefferkorn FE, Shin YC. Laser-assisted machining of magnesiapartially-stabilized zirconia. J Manuf Sci Eng 2004;126(1):42-51.
    [73]
    . Kizaki T, Tio Y, Tanabe S. Laser-assisted machining of zirconia ceramics using a diamond bur. J Procedia CIRP 2016;42:497-502.
    [74]
    . Hao Z. Molecular Dynamics analysis of tool wear in cutting Ni-Fe-Cr-Co-Cu based nickel alloys. Mechanical Engineering and Technology 2020;9:60-68.
    [75]
    . Rao X, Zhang F, Lu Y, et al. Analysis of diamond wheel wear and surface integrity in laser-assisted grinding of RB-SiC ceramics. Ceramics International 2019;45(18):24355-24364.
    [76]
    . Linke B, Klocke F. Temperatures and wear mechanisms in dressing of vitrified bonded grinding wheels. J Mach Tool Manuf 2010;50(6):552-558.
    [77]
    . Lei S, Shin YC, Incropera FP. Experimental investigation of thermo-mechanical characteristics in laser-assisted machining of silicon nitride ceramics. Journal of Manufacturing Science and Engineering 2010;123:639-646.
    [78]
    . Quinsat Y, Sabourin L, Lartigue C. Surface topography in ball end milling process: description of a 3D surface roughness parameter. Mater Process Technol 2008;195(1):135-143.
    [79]
    . Chang C, Kuo C. An investigation of laserassisted machining of Al2O3 ceramics planing. International Journal of Machine Tools and Manufacture 2007;47(3):452-461.
    [80]
    . Guerrini G, Adrian HL, Melkote SN, et al. High throughput hybrid laser assisted machining of sintered reaction bonded silicon nitride. Journal of Materials Processing Technology 2018;252:628-635.
    [81]
    . Wang Y, Yang L, Wang X. An investigation of laser-assisted machining of Al2O3 particle reinforced aluminum matrix composite. Journal of Materials Processing Technology 2002;129(1):268-272.
    [82]
    . Yan W, Gao T, Guo X, et al. Melting kinetics of bulk SiC using molecular dynamics simulation. Science China Physics, Mechanics and Astronomy 2013;56(9):1699-1704.
    [83]
    . Ohmori H. Electrolytic In-process Dressing (ELID) grinding for optical parts manufacturing. M//N. Ikawa S, Shimada T, Moriwaki, et al. roceedings of the 7th International Precision Engineering Seminar, Kobe; 1993. p. 134-148.
    [84]
    . Xin W, Ding W, Zhao B. A review on machining technology of aero-engine casings. Journal of Advanced Manufacturing Science and Technology 2022;2(3):2-9.
    [85]
    . Murata R, Okano K, Tsutsumi C. Grinding of structural ceramics. Shaw Grinding Symposium PED 1985;16:261-272.
    [86]
    . Bandyopadhyay BP, Ohmori H, Takahashi I. Efficient and stable grinding of ceramics by electrolytic in-process dressing (ELID). Journal of Materials Processing Technology 1997;66(1):18-24.
    [87]
    . Itoh N, Ohmori H. Grinding characteristics of hard and brittle materials by fine grain lapping wheels with ELID. Journal of Materials Processing Technology 1996;62(4):315-320.
    [88]
    . Ohmori H, Nakagawa T. Analysis of mirror surface generation of hard and brittle materials by ELID (Electronic In-Process Dressing) grinding with superfine grain metallic bond wheels. J CIRP Annals 1995;44(1):287-290.
    [89]
    . Ohmori H, Yamagata Y, Moriyasu S, et al. Ultraprecision machining ELID-grinding technique realizing ultraprecision and ultrafine fabrication. Hyomen Kagaku 2001;22:167-172.
    [90]
    . Ohmori H, Nakagawa T. Utilization of nonlinear conditions in precision grinding with ELID (Electrolytic In-Process Dressing) for fabrication of hard material components. J CIRP Annals 1997;46(1):261-264.
    [91]
    . Ohmori H, Nakagawa T. Mirror surface grinding of silicon wafers with electrolytic in-process dressing. J CIRP Annals 1990;39(1):329-332.
    [92]
    . Guan J, Zhang X, Ma X. An experimental research on copper and aluminum precision machining adopting ELID grinding technology. Machinnery Design & Manufacture 2014;3:97-99.
    [93]
    . Yu L, Pang H. Affect on the ceramic surface roughness ELID grinding parameters of the power. Technology and Market 2013;12(2):12-13.
    [94]
    . Weng H, Chen Q, Bao M. Effects of pulse duty cycles on microarc oxidationformed on Al.Surface Technology 2005;34(5):59-62.
    [95]
    . Zhang B, Wu Y, Qu M. Evaluation of grinding performance for micromotor rotor shaft by microcrystalline ceramic corundum grinding wheel. Diamond & Abrasives Engineering 2022;42(5):578-584.
    [96]
    . Namba Y, Abe M, Kobayashi A. Ultraprecision grinding of optical glasses to produce supersmooth surfaces. J CIRP Annals 1993;42(1):417-420.
    [97]
    . Li B, Song X, Wu Y, et al. Supersmooth grinding technology of spindle outer circle. Diamond & abrasives engineering 2023;43(4):447-454.
    [98]
    . Jin D. Research on Ultra-precision grinding of hardand brittle material SiN4 with ElectrolyticInprocess Dressing(ELID) [dissertation]. Tianjin :Tianjin University, 2006.
    [99]
    . Ohmori H, Takahashi I, Bandyopadhyay BP. Ultra-precision grinding of structural ceramics by electrolytic in-process dressing (ELID) grinding. Journal of Materials Processing Technology 1996;57(3):272-277.
    [100]
    . Zhang L, Ohmori H, Marinescu I, et al. Grinding of ceramic coatings with cast iron bond diamond wheels. a comparative study: ELID and rotary dresser. The International Journal of Advanced Manufacturing Technology 2001;18(8):545-552.
    [101]
    . Yang M, Liu C, Guo B, et al. Understanding of highly-oriented 3C-SiC ductile-brittle transition mechanism in ELID ultra-precision grinding. Materials Characterization 2023;203:113-136.
    [102]
    . Xiao Q. Study of the machining principle and influencing of ELID grinding on SiC. Applied Mechanics and Materials 2012;217:1642-1645.
    [103]
    . Zhanga C, Ohmori H, Kato T. Evaluation of surface characteristics of ground CVD-SiC using cast iron bond diamond wheels. Precision Engineering 2001;25(1):56-62.
    [104]
    . Lin W, Ohmori H, Suzuki T. VI lapping and polishing-polishing characteristics of ELIDground surface of nano precision optical elements. Key Engineering Materials 2005;291:365-370.
    [105]
    . Dai Y, Ohmori H, Watanabe Y. Subsurface properties of ceramics for lightweight mirrors after ELID grinding. J JSME International Journal Series C 2004;47(1):66-71.
    [106]
    . Xiao Q. Research on high efficiency and low damage grinding mechanism and experiments for SiC single crystal [dissertation]. Xi’an: Xi’an University of Technology; 2019.
    [107]
    . Zhu Z, Peng B, Feng R, et al. Molecular dynamics simulation of chip formation mechanism in single-crystal nickel nanomachining. Science China Technological Sciences 2019; 62(11):1916-1929.
    [108]
    . Ohmori H, Dai Y, Lin W, et al. Force characteristics and deformation behaviors of sintered SiC during an ELID grinding process. Key Engineering Materials 2003;238:65-70.
    [109]
    . Hu B. Theoretical and experimental study on grinding temperature in elid grinding process [dissertation]. Hangzhou: Zhejiang University of Technology, 2013.
    [110]
    . Zhou Z, Deng C, Chen G, et al. Grinding technology development and key technologies. China Mechanical Engineering 2000;(Z1):195-198 [Chinese].
    [111]
    . Li W, Zhan F, Xu M. Fuzzy control theory and technique of ELID grinding. Journal of Zhejiang University of Technology 2015;43(4):39-42.
    [112]
    . Zhang Y, Ren C, Zuo Z, et al. Experimental study and prediction of surface roughnessin of ELID form grinding. Aerospace Material Technology 2018;48(6):28-33.
    [113]
    . Bandyopadhyay BP, Ohmori H, Takahashi I. Ductile regime mirror finish grinding of ceramics with Electrolytic In-process Dressing (ELED) grinding. Materials and Manufacturing Processes 1996;11(5):789-801.
    [114]
    . Lim HS, Fathima K, Senthil KA, et al. A fundamental study on the mechanism of electrolytic in-process dressing (ELID) grinding. International Journal of Machine Tools and Manufacture 2002;42(8):935-943.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(1)

    Article Metrics

    Article views (675) PDF downloads(114) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return