Volume 2 Issue 2
Mar.  2022
Turn off MathJax
Article Contents
Caixu YUE, Zhenlong XIE, Xianli LIU, Mingwei ZHAO. Chatter prediction of milling process for titanium alloy thin-walled workpiece based on EMD-SVM[J]. Journal of Advanced Manufacturing Science and Technology , 2022, 2(2): 2022010. doi: 10.51393/j.jamst.2022010
Citation: Caixu YUE, Zhenlong XIE, Xianli LIU, Mingwei ZHAO. Chatter prediction of milling process for titanium alloy thin-walled workpiece based on EMD-SVM[J]. Journal of Advanced Manufacturing Science and Technology , 2022, 2(2): 2022010. doi: 10.51393/j.jamst.2022010

Chatter prediction of milling process for titanium alloy thin-walled workpiece based on EMD-SVM

doi: 10.51393/j.jamst.2022010
Funds:

This study was co-supported by the Projects of Outstanding Youth Fund of Heilongjiang Province (No. YQ2019E029) and International Cooperation and Exchanges NSFC (No. 51720105009).

  • Received Date: 2022-01-20
  • Accepted Date: 2022-03-18
  • Rev Recd Date: 2022-02-12
  • Available Online: 2022-03-30
  • Publish Date: 2022-03-29
  • Easy cutting vibration of Titanium alloy thin-walled structural components in processing process directly influences the quality of part machining surface. So, the chatter prediction has become a research hotspot. The milling process of Ti-6Al-4V framework parts for hard alloy cutter is researched and chatter prediction methods are proposed to solve the chatter problem generated in milling process. The signals in milling process are comprehensively considered to work out the stability boundary and the chatter prediction model based on Empirical Mode Decomposition (EMD) and Support Vector Machine (SVM). The stability lobe diagram is utilized to select experiment parameter for experiment, in which the 1/3-2/3 position of framework parts chatters easily in processing. The model training in experiment aims to monitor the time of chatter, with the recognition precision of 97.50%.
  • loading
  • [1]
    . Quintana G, Ciurana J. Chatter in machining processes:A review. International Journal of Machine Tools and Manufacture 2011; 51(5):363-376.
    [2]
    . Dang XB, Wan M, Yang Y. Prediction and suppression of chatter in milling of structures with low-rigidity:A review. Journal of Advanced Manufacturing Science and Technology 2021; 1(3):2021010.
    [3]
    . Niu JB, Xu JT, Ren F, et al. A short review on milling dynamics in low-stiffness cutting conditions:Modeling and analysis. Journal of Advanced Manufacturing Science and Technology 2021; 1(1):2020004
    [4]
    . Fu Y, Zhang Y, Zhou HM, et al. Timely online chatter detection in end milling process.Mechanical Systems and Signal Processing 2016; 75:668-688.
    [5]
    . Liu C, Zhu L, Ni C. The chatter identification in end milling based on combining EMD and WPD.The International Journal of Advanced Manufacturing Technology 2017; 91(9-12):3339-3348.
    [6]
    . Feng JL, Sun ZL, Jiang ZH, et al. Identification of chatter in milling of Ti-6Al-4V titanium alloy thin-walled workpieces based on cutting force signals and surface topography. The International Journal of Advanced Manufacturing Technology 2016; 82:1909-1920.
    [7]
    . Liu HQ, Chen QH, Li B, et al. On-line chatter detection using servo motor current signal in turning. Sci China Technology 2011; 54(12):3119-3129.
    [8]
    . Cao H, Zhou K, Chen X. Chatter identification in end milling process based on EEMD and nonlinear dimensionless indicators.International Journal of Machine Tools and Manufacture 2015; 92:52-59.
    [9]
    . Aslan D, Altintas Y. On-line chatter detection in milling using drive motor current commands extracted from CNC. International Journal of Machine Tools and Manufacture 2018; 132:64-80.
    [10]
    . Ji YJ, Wang XB. Early milling chatter identification by improved empirical mode decomposition and multi-indicator synthetic evaluation. Journal of Sound and Vibration 2018; 433:138-159
    [11]
    . Jia G, Wu B, Hu Y. A synthetic criterion for early recognition of cutting chatter. Sci. China Technology 2013; 56:2870-2876.
    [12]
    . Xie FY, Jiang WW, Chen HN. Cutting chatter recognition based on generalized BP neural network. Journal of Vibration and Shock 2018; 37(5):65-70[Chinese].
    [13]
    . Ren JB, Sun GZ, Chen B. Milling chatter identification method based on wavelet packet transform and kernel principal compose. Noise and Vibration Control 2015; 34(5):161-165[Chinese].
    [14]
    . Jia GF, Hu YM. Cutting chatter recognition based on Hilbert-Huang transform. Journal of Vibration and Shock 2015; 33(22):188-192[Chinese].
    [15]
    . Shrivastava Y, Singh B. Possible way to diminish the effect of chatter in CNC turning based on EMD and ANN approaches. Arabian Journal for Science and Engineering 2018; 43:4571-4591.
    [16]
    . Wang YX. Vibration detection of Titanium alloys in high-speed milling[dissertation]. Harbin:Harbin University of Science and Technology, 2012.
    [17]
    . Wu S, Liu XL. Experimental study of the nonlinear characteristics of vibration in milling chatter. Vibration Test and Diagnosis 2012; 32(6):935-940[Chinese].
    [18]
    . Chen HG, Shen JY, Chen WH, et al. Grinding chatter detection and identification based on BEMD and LSSVM. Chinese Journal of Mechanical Engineering 2019; 32(1):90-102[Chinese].
    [19]
    . Liu J, Hu YM Wu B, et al. A hybrid health condition monitoring method in milling operations. International Journal of Advanced Manufacturing Technology 2017; 92:2069-2080.
    [20]
    . Rizal M, Ghani J, Nuawi M. The application of I-kaz (TM) based method for tool wear monitoring using cutting force signal. Procedia Engineering 2013; 68(1):461-468.
    [21]
    . Plaza E, Lopez P, Gonzalez E. Multi-sensor data fusion for real-time surface quality control in automated machining systems. Sensors 2018; 18(12):11-17.
    [22]
    . Huang NE, Shen Z, Long SR. The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis, Proceedings Mathematical Physical and Engineering Sciences 1998; 454(1971):903-995.
    [23]
    . He ZP, Zhu ZQ, Xie HC. The coupling of linear extrapolation method and similar extreme extension method to restrain boundary effect of EMD. Mechanical Science and Technology for Aerospace Engineering 2018; 37(8):1200-1206.
    [24]
    . Peng C, Wang L, Liao TW. A new method for the prediction of chatter stability lobes based on dynamic cutting force simulation model and support vector machine. Journal of Sound and Vibration 2015; 354(1):118-131[Chinese].
    [25]
    . Abdoos AA, Mianaei PK, Ghadikolaei MR.Combined VMD-SVM based feature selection method for classification of power quality events.Applied Soft Computing 2016; 38(1):637-646.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(1)

    Article Metrics

    Article views (953) PDF downloads(80) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return