Volume 1 Issue 2
Apr.  2021
Turn off MathJax
Article Contents
Dianfang MU, Xianli LIU, Caixu YUE, Qiang LIU, Zhengyan BAI, Steven Y. LIANG, Yunpeng DING. On-line tool wear monitoring based on machine learning[J]. Journal of Advanced Manufacturing Science and Technology , 2021, 1(2): 2021002. doi: 10.51393/j.jamst.2021002
Citation: Dianfang MU, Xianli LIU, Caixu YUE, Qiang LIU, Zhengyan BAI, Steven Y. LIANG, Yunpeng DING. On-line tool wear monitoring based on machine learning[J]. Journal of Advanced Manufacturing Science and Technology , 2021, 1(2): 2021002. doi: 10.51393/j.jamst.2021002

On-line tool wear monitoring based on machine learning

doi: 10.51393/j.jamst.2021002
Funds:

This research was funded by Projects of International Cooperation and Exchanges NSFC (Grant Number 51720105009) and National Key Research and Development Project (Grant Number 2019YFB1704800) and Outstanding Youth Fund of Heilongjiang Province (Grant Number YQ2019E029) and Natural Science Foundation for Colleges and Universities of Jiangsu Province (No. 19KJB460021)

  • Received Date: 2021-02-02
  • Rev Recd Date: 2021-02-18
  • Available Online: 2021-03-05
  • Publish Date: 2021-03-04
  • Accurate tool condition monitoring is necessary for the development of automatic milling technology. In order to improve the accuracy and real-time of online monitoring of tool wear state in machining process, an online monitoring system of milling cutter state based on LabVIEW software development is proposed. Firstly, the modern monitoring technology is introduced into the online monitoring of tool state in principle. The vibration signal is analyzed by wavelet packet in time-frequency domain, and the online monitoring of tool state is realized by machine learning algorithm model. The system can be used for real-time monitoring of tool status, timely alarm to facilitate tool replacement, and ensure high efficiency and high quality of processing. The effectiveness and feasibility of the online monitoring system for milling cutter wear state are verified by experiments, and the purpose of online monitoring tool wear state is preliminarily realized.

  • loading
  • [1]
    . Bhagat S N, Nalbalwar S L. LabVIEW based tool condition monitoring and control for CNC lathe based on parameter analysis. IEEE International Conference on Recent Trends in Electronics. 2016.
    [2]
    . Zhou CA. On-line monitoring vibration toolholder system and signal singularity analysis of milling tool wear state [dissertation]. Ji’nan: Shandong University, 2020 [Chinese].
    [3]
    . Liu XL, Liu Q, Yue CX, et al. Intelligent technology in cutting process. Journal of Mechanical Engineering 2018; 54(16):45-61 [Chinese].
    [4]
    . Bhuiyan M S H, Choudhury I A, Dahari M. Monitoring the tool wear, surface roughness and chip formation occurrences using multiple sensors in turning. Journal of Manufacturing Systems 2014; 33(4):476-87.
    [5]
    . Wang CD, Bao ZL, Zhang PQ, et al. Tool wear evaluation under minimum quantity lubrication by clustering energy of acoustic emission burst signals. Measurement 2019;138: 256–65.
    [6]
    . Ghosh N, Ravi Y B, Patra A, et al. Estimation of tool wear during CNC milling using neural network-based sensor fusion. Mechanical Systems & Signal Processing 2007; 21(1):466-79.
    [7]
    . He Y, Ling JJ, Wang YL. et al. Tool wear online monitoring model based on long-short-term memory convolution neural network. China Mechanical Engineering 2020; 31(16):73-81 [Chinese].
    [8]
    . Gui Y, Leng S, Dai Z, et al. A framework for big data driven on-line monitoring of tool wear. 2020 IEEE 7th International Conference on Industrial Engineering and Applications (ICIEA). 2020.
    [9]
    . Xu GH, Meng LH, Jiang KS, et al. On-line monitoring technology of tool condition based on intelligent alarm. Journal of Vibration. Measurement and Diagnosis 2013; 33(3):377-81,522 [Chinese].
    [10]
    . Lu ZY, Ma PF, Xiao JL, et al. On-line monitoring of tool wear state in machining process based on machine tool information. China Mechanical Engineering 2019;30(2):220-5 [Chinese].
    [11]
    . Li GH. Research on tool wear monitoring technology for rotary ultrasonic machining of hard and brittle materials[dissertation]. Harbin: Harbin Institute of Technology, 2016.
    [12]
    . Zhu H, Ni S, Chen W. Research and development on intelligent cutting tools with capability of on-line monitoring and prediction. Journal of Physics: Conference Series 2020; 1650(3): 032143.
    [13]
    . Huang M, Liu XL, Xie HZ. Tool Wear fault monitoring method and experimental system for high-grade CNC machine tools. Journal of Beijing University of Information Technology (Natural Science Edition) 2012; 27(1):16-21 [Chinese].
    [14]
    . Terrazas G, Martínez-Arellano G, Benardos P, et al. Online tool wear classification during dry machining using real time cutting force measurements and a CNN approach. Journal of Manufacturing & Materials Processing 2018; 2(4):2040072.
    [15]
    . Zhao CX, Bai CJ, Pan JT. On-line monitoring of tool wear of CNC machine tools based on LabVIEW. Equipment Management and Maintenance 2015;(11):97-100 [Chinese].
    [16]
    . Liu WB, Liu TJ, Shi YQ, et al. Design of temperature control system for internal cooling intelligent turning tool based on LabVIEW. Agricultural Equipment and Vehicle Engineering 2018; 56(10):6-8 [Chinese].
    [17]
    . Panda A, Sahoo AK, Panigrahi I, et al. Prediction models for on-line cutting tool and machined surface condition monitoring during hard turning considering vibration signal. Mechanics and Industry 2020; 21(5):520.
    [18]
    . Zhu K, Li G, Zhang Y. Big data oriented smart tool condition monitoring system. IEEE Transactions on Industrial Informatics 2020; 16(6):4007-4016.
    [19]
    . Zhang MZ. Study on wear condition monitoring of milling cutter based on spindle current [dissertation]. Dalian: Dalian University of Technology, 2018 [Chinese].
    [20]
    . Chen BJ, Chen XF, Li B, et al. Application of logistic regression model in reliability evaluation of machine tool. Chinese Journal of Mechanical Engineering 2011; 47(18):158-64.
    [21]
    . Aliustaoglu C, Ertunc HM, Ocak H. Tool wear condition monitoring using a sensor fusion model based on fuzzy inference system. Mechanical Systems & Signal Processing 2009; 23(2): 539-46.
    [22]
    . Shah H S, Patel PN, Shah SP, et al. 8 channel vibration monitoring and analyzing system using LabVIEW. 2013 Nirma University International Conference on Engineering (NUiCONE). 2014.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(1)

    Article Metrics

    Article views (2123) PDF downloads(209) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return