Lizhuo DONG, Tianfei ZHENG, Lingsong FAN, Baohai WU, Fei Li. A machining state identification method for thin-walled workpiece milling processes based on acceleration signalsJ. Journal of Advanced Manufacturing Science and Technology . DOI: 10.51393/j.jamst.2027007
Citation: Lizhuo DONG, Tianfei ZHENG, Lingsong FAN, Baohai WU, Fei Li. A machining state identification method for thin-walled workpiece milling processes based on acceleration signalsJ. Journal of Advanced Manufacturing Science and Technology . DOI: 10.51393/j.jamst.2027007

A machining state identification method for thin-walled workpiece milling processes based on acceleration signals

  • During the milling process, excessive vibration will cause reduced machining quality and damage to the process system. Hence, to continually monitor workpiece vibration and preemptively detect unstable vibration conditions, a vibration condition monitoring method based on acceleration signals is proposed for use during the milling process. Initially, the acceleration signal is acquired during milling, followed by noise reduction using spectral subtraction to obtain a denoised signal. Subsequently, the signal undergoes an ensemble empirical mode decomposition, and the most energetic intrinsic mode function is analyzed to extract the standard deviation (std), identifying the stable machining state. Next, a filter is applied to extract the chatter-related component from the acceleration signal. By combining std with the ration of the standard deviation of the chatter-related component to that of the acceleration signal, the vibration type can be identified. Finally, the thresholds of the identification indicators are determined through milling experiments on thin-walled blades. The proposed method is validated under different machining parameters and demonstrates high efficiency and effectiveness, providing methodological support for online monitoring and fault prevention.
  • loading

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return